|
Bosch T101BR 4-Inch 10-Tooth Jig Saw Blades, 5-Pack
|
MSRP: $11.80
Your Price: $9.29
Savings: $ 2.51 ( 21% )
Shipping: Usually ships in 24 hours
Manufacturer: Bosch
Prices subject to change. Please verify price during checkout.
|
|
Bosch T101BR 4-Inch 10-Tooth Jig Saw Blades, 5-Pack Features
|
5-pack
4-Inch length
10-Teeth
Down cutting plastic
Laminates
|
|
|
|
|
|
|
|
|
Additional Bosch T101BR 4-Inch 10-Tooth Jig Saw Blades, 5-Pack Information
|
Features Bosch style Tang shank, (T shank). Eliminates set screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4" long, 10 TPI, for straight fine cuts No. T101BR:
|
|
|
What Customers Say About Bosch T101BR 4-Inch 10-Tooth Jig Saw Blades, 5-Pack:
|
|
This applies to the several other tooth designs that I keep on hand--all Bosch--all good blades. This is the only brand of jig saw blades that I have in my shop. As long as Bosch keeps selling these quality blades made in Switzerland I won't even consider any other brand.
Also it's easier to mark out on the top side. The blades may work in a standard jig saw but I did not try them. I used these with a Bosch jig saw to cut laminate counters after they were installed. I used 3/4 plywood under the laminate counter, so the overall thickness where the holes were cut was 1 -1/2 inches. I ordered the countertops from hd, ready-made from the fabricator, straight runs of counter only, and recommend this approach -if you only do counter tops every 20 years or so. They were the post form type, and it made the whole job much easier cutting out sink holes from the top (no chips at all). Avoids flipping over a counter after cutting a large sink hole in the middle.
THESE BLADES WORK FANTASTIC IN LAMINATED COUNTER TOPS FOR CUTTING SINK HOLES FROM THE TOP SIDE WITHOUT CHIPPING.
Great quality.Effortless to change between different types of blades.
|
|
 |
|
|
